Milwaukee 3699-22 M18 FUEL™ 2-Tool Hammer Drill and SURGE™ Hydraulic Driver Combo Kit

Milwaukee 3697-22 M18 FUEL™ 2-Tool Hammer Drill and SURGE™ Hydraulic Driver Combo Kit

$549.00

Only 1 Available (can be backordered)

UOM: EA SKU: 3699-22 Categories: , , , , , , ,

Description

Milwaukee 3699-22 M18 FUEL™ 2-Tool Hammer Drill and SURGE™ Hydraulic Driver Combo Kit

The Milwaukee 3699-22 M18 FUEL™ 2-Tool Hammer Drill and SURGE™ Hydraulic Driver Combo Kit includes:

  • 2904-20 M18 FUEL™ 1/2″ Hammer Drill/Driver
  • 2760-20 M18 FUEL SURGE 1/4″ Hex Hydraulic Driver
  • 2 – 48-11-1850 M18™ REDLITHIUM™ XC5.0 Extended Capacity Battery Packs
  • 48-59-1812 M18™ & M12™ Multi-Voltage Charger
  • Side Handle
  • 2 – Belt Clips
  • Carrying Case
2904-20 M18 FUEL™ 1/2″ Hammer Drill/Driver:

Features:

  • Product no. 2904-22
  • Most Powerful Hammer Drill
  • Only 6.9″ in length for access into tight spaces and reduced fatigue
  • Auto-Stop™ Control Mode enhances safety
  • POWERSTATE™ Brushless Motor:
        • Delivers the power to complete the widest range of applications of any hammer drill driver
  • Fastest Drilling and Driving applications under load
  • Auto-Stop Feature:
        • Protects from over-rotation in a bindup for enhanced safety
        • Equipped with a dedicated autostop light on foot of tool to indicate a protection event
  • 1/2″ All-metal Chuck with Carbide Teeth for maximum durability, grip and bit retention
  • Mechanical Clutch for consistency in driving a wide range of fasteners
  • Hammer Drill Mode for fast drilling into Brick, Block or Concrete
  • All-metal belt clip for portability
  • 1,400 in-lbs of torque
  • LED light for better visibility in low-light situations
  • Unmatched Performance with the most runtime in class with the XC5.0Ah batteries

Specifications:

  • Battery voltage and chemistry: 18V Lithium Ion
  • Capacity in Steel: 1/2″
  • Capacities in Wood:
        • 1-1/2″ with Flat bit
        • 1-1/2″ with Auger bit
        • 3-1/2″ with Hole saw
        • 2-9/16″ with Self-feed bit
        • 5/8″ diameter screws
  • Capacity in Masonry: 5/8″
  • No load speed ranges:
        • Low: 0 to 500 RPM
        • High: 0 to 2,100 RPM
  • Blows per minute: High: 0 to 33,000 BPM
  • Peak torque: 1,400 in-lbs
  • Chuck: 1/2″ All Metal Ratcheting
  • Length: 6.95″
  • Height: 8.23″
  • Width: 2.38″
  • Weight: 3.3 lbs
2760-20 M18 FUEL SURGE 1/4″ Impact Driver:

FLUID-DRIVE™ Hydraulic Powertrain:

  • Reduces metal-on-metal contact inside the tool
  • Minimizes wear for increased durability compared to standard impact drivers
  • Delivers smoother performance, longer service life and quieter operation
  • Completely sealed mechanism filled with hydraulic fluid
  • Fluid is compressed and expanded 4,000 times per minute (IPM) to generate torque

50% Quieter than standard impact drivers:

  • 76 dBA operating level is about 10 dBA lower than standard impact drivers
  • Rule of thumb: 10 dBA reduction in noise level is perceived as 50% quieter
  • In most applications SURGE is below the OSHA requirement for hearing protection

3X Less vibration:

  • Smoother operation
  • Superior operator control
  • Less cam out
  • Less operator strain and fatigue

Longer sustained torque:

  • 450 in-lbs of longer sustained torque
  • Delivers equal or faster driving speed than standard impact drivers
  • Reaches peak torque faster
  • Holds peak torque longer
  • Impacts faster at 4,000 IPM

4-Mode Driver Control:

  • For greater control over output speed and power
  • Self-Tapping Screw Mode reduces walking when starting self-tapping screws
  • Self-Tapping Screw Mode reduces over-driving, breaking and stripping out of screws

Milwaukee M18 FUEL advantage:

  • POWERSTATE™ Brushless Motor delivers faster cuts, reduced heat and extended service life
  • REDLITHIUM™ Battery Pack for more work per charge and more work over the life of the pack
  • REDLINK PLUS™ Intelligence optimizes performance and overload protection
Specifications:
  • Battery voltage and chemistry: 18V Lithium Ion
  • No load speed: 3,000 RPM
  • Impacts Per Minute: 4,000 IPM
  • Peak torque: 450 in-lbs
  • Application sound rating: 76 dBA
  • Tool weight: 2.3 lbs
  • Length: 5″
  • Height: 7.67″
  • Width: 2.38″
  • Tool warranty: 5 years
  • Battery warranty: 2 years

Typical small and medium fastener applications:

  • Self-tapping screws
  • Finish work
  • Wood screws
  • No Hub bands
  • Small diameter hex head bolts
  • Deck screws
  • Cabinet screws

Typical users:

  • Carpenters
  • Remodelers
  • Electricians
  • Mechanical contractors
  • HVAC contractors

Click here for a selection of Milwaukee Driver Bit Sets

Additional information

Weight 16 lbs
18V Power Tools

Brand Name

Reviews

There are no reviews yet.

Be the first to review “Milwaukee 3699-22 M18 FUEL™ 2-Tool Hammer Drill and SURGE™ Hydraulic Driver Combo Kit”

Your email address will not be published. Required fields are marked *