Jet 408804 2 PC Air Filter, Regulator and Lubricator 1/2″ NPT

$194.64

Description

Jet 408804 2 PC Air Filter/Regulator and Lubricator 1/2″ NPT

  • Product no. 408804
  • Model no. AFRLCS12
  • Space saving 2-Piece Modular Filter/Regulator Combo and Lubricator air preparation unit
  • Filter/Regulator Combo and Lubricator are connected together using a spacer block with a built-in mounting bracket and piping adaptors
  • The 2 components are easily removable or mountable without disturbing the pipe line
  • Fully modular for easy maintenance
  • Modular mounting
  • Designed for maximum flow
  • Each unit is 100% factory tested and certified for guaranteed performance
  • Maximum Working Air Pressure: 145 PSI
  • Ambient Temperature: 0º C to 60º C (32º F to 140º F)
  • Inlet Pressure: 105 PSI (7 BAR)
  • Set Pressure: 90 PSI (6 BAR)
  • Pressure Drop: 17 PSI (1.0 BAR)
  • Pressure Adjustment Range: 7 to 145 PSI (0.5 to 10 BAR)

Air Filter:

  • Prevents dust, water and other impurities from reaching air tools for longer tool life
  • Die cast aluminum filter head construction
  • Polycarbonate bowl with a steel bowl guard
  • High performance sintered Bronze filtering element
  • 40 micron filtering element
  • Equipped with a Separator & Shield for efficient moisture separation
  • Press type manual drain with “Night Time Drain” feature
  • “Night Time Drain” automatically drains the bowl when the compressed air supply to the filter is switched off

Air Pressure Regulator:

  • Used to maintain a steady outlet pressure, unaffected by variations/fluctuations in the inlet pressure
  • Regulators step down the air line pressure and can be set at any pressure below the inlet pressure
  • Die cast aluminum body construction
  • Equipped with a non-raising “Press to Lock” adjusting knob for locking at any set pressure
  • Works on a diaphragm-operated relieving type mechanism with the pressure compensated by balanced poppet
  • JET air regulators can be installed in any position

Lubricator:

  • Used to feed lubricants to pneumatic equipment
  • Designed to maintain a constant oil-to-air density over a wide range of flow
  • Are fog/micro mist type lubricators for up to 50 ft. pipe runs
  • Die cast aluminum head
  • Polycarbonate bowl with a steel bowl guard
  • Lubricator head is equipped with an oil drop indicator, oil drop controller and oil filling plug
  • WARNING: Polycarbonate bowls may be damaged & possibly fail if exposed to synthetic oils, thinner, solvents, trichloroethylene, kerosene or other aromatic hydrocarbons

Wetted Components:

  • Aluminum
  • Bronze
  • Brass
  • Steel
  • Acetal
  • Polycarbonate
  • Stainless Steel
  • Nitrile
2 PC Air Filter/Regulator and Lubricator Specification & Comparison Chart
Product no. 408801 408802 408804 408808 408809
Model no. AFRLCM14 AFRLCI38 AFRLCS12 AFRLCH34 AFRLCH1
Description Miniature Intermediate Standard Heavy Duty Heavy Duty
Bowl Guard Type Steel/Threaded Steel/Bayonet Steel/Bayonet Steel/Bayonet Steel/Bayonet
Regulator Venturi for Flow Compensation No Built-in Built-in Built-in Built-in
Port Size 1/4″ 3/8″ 1/2″ 3/4″ 1″
Max. Flow Rate  (CFM) 18 44 99 123 140
Max. Flow Rate (LPM) 500 1,250 2.800 3,500 4,000
Pressure Gauge Port Size 1/8″ 1/8″ 1/8″ 1/4″ 1/4″
Filter Bowl Size (oz) 0.3 1.08 1.5 5.6 5.6
Filter Bowl Size (ml) 9 32 44 165 165
Lubricator Bowl Size (oz) 0.68 1.93 5.17 6.8 6.8
Lubricator Bowl Size (ml) 20 57 152 200 200
Height (in.) 6.69 8.66 11.02 14.6 14.6
Height (mm) 170 220 280 370 370
Width (in.) 5.75 7.17 8.66 10.63 10.63
Width (mm) 146 182 220 270 270

Additional information

Weight 5.70 lbs
Brand Name

Reviews

There are no reviews yet.

Be the first to review “Jet 408804 2 PC Air Filter, Regulator and Lubricator 1/2″ NPT”

Your email address will not be published. Required fields are marked *