Description
Wera 033606 Kraftform Kompakt VDE 3060 iS SB Slim Slotted Stainless Steel Screwdriver Blade 0.6mm x 3.5mm x 154mm
The Wera 033606 Kraftform Kompakt VDE 3060 iS SB Slim Slotted Stainless Steel Screwdriver Blade 0.6mm x 3.5mm x 154mm:
- Product no. 033606
- Article no. Kraftform Kompakt VDE 3060 iS SB
- Tip size: 0.6mm x 3.5mm
- Shaft length: 154mm (6-1/16″)
- Kraftform Kompakt VDE interchangeable blades for slotted screws
- Slim (Reduced shaft diameter) and integrated insulation protection:
-
-
- For accessing and actuating low-lying PosiDriv screws
-
-
- Made of stainless steel to prevent extraneous rust
- Vacuum ice-hardening provides the required hardness and strength
- 9 mm hex drive with with entry chamfer
- Insulated:
-
-
- Insulated blade individually tested as per IEC 60900
- Dielectric strength tested under a 10,000-volt load in a water bath
- Guaranteed safe for working up to 1,000 volts
-
-
- Handle/interchangeable blade system:
-
-
- Allows rapid exchange of the blades required for a wide range of applications
-
-
Available Wera Slim (Reduced Shaft Diameter) Insulated Stainless Steel Slotted Screwdriver Blades – sold separately:
- 033606: 0.6mm x 3.5mm x 154mm
- 033607: 0.8mm x 4.0mm x 154mm
- 033608: 1.0mm x 5.5mm x 154mm
Also available Standard Insulated Stainless Steel Slotted Blades – sold separately:
- 033600: 0.4mm x 2.5mm x 154mm
- 033601: 1.2mm x 6.5mm x 154mm
Available with Slim (Reduced Shaft Diameter) Black Wera Tip Blades – sold separately:
- 003406: 0.6mm x 3.5mm (9/64″) x 154mm (6-1/16″)
- 003407: 0.8mm x 4.0mm (5/32″) x 154mm (6-1/16″)
- 003408: 1.0mm x 5.5mm (7/32″) x 154mm (6-1/16″)
Suitable for the following Kraftform handles – sold separately:
- 074752 7440 VDE 0.3 to 1.2 Nm Insulated Adjustable Torque Screwdriver
- 074750 7441 VDE 1.2 to 3.0 Nm Insulated Adjustable Torque Screwdriver
- 074757 7444 VDE 1.7 to 3.5 Nm Insulated Adjustable Torque Screwdriver
- 057481 827 T i Kraftform Turbo Blade Holding Handle
- 003990 817 VDE Insulated Screwdriver Blade-Holding Handle