Description
Titebond 5492 825ml All-Weather Subfloor Adhesive
Titebond 5492 825ml All-Weather Subfloor Adhesive:
Features:
- Product no. 5492
- Cartridge size: 825 ml
- Recommended for:
-
-
- Subfloor installations
- General plywood use
- Filling gaps and irregularities in subfloors
-
-
- Compatible with common building materials including:
-
-
- Wood
- Engineered lumber
- Particleboard
- OSB
- Wet lumber
- Frozen lumber
- Treated lumber
-
-
- Solvent-based
- Prevents squeaks
- Works extremely well in cooler temperatures
- Increases floor rigidity
- Ideal for:
-
-
- Plywood
- Particle board
- OSB
-
-
Physical Properties:
- Type: Synthetic elastomeric polymer
- State: Medium-viscosity mastic
- Color: Light tan
- Solids: 67%
- Viscosity: 130,000 cps
- VOC: > 350 g/L
- Flashpoint: < 0°F
- Freeze / Thaw Stability: Will not freeze
- Storage Life: 18 months in tightly closed containers at 75°F
- Odor: Solvent (slight)
Application Guidelines:
- Application Temperature Range: 0°F to 100°F
- Service Temperature Range: -20°F to 120°F
- Working Time: Approximately 10-20 minutes for a 1/4″ bead
- Prep: Surfaces must be clean and free of any material that may prevent adequate adhesion.
- Application:
-
-
- Cut tip straight across for 3/8” to 1/2” bead. Puncture inner seal and place in cartridge gun
- Apply adhesive to each furring strip, stud or floor joist to be covered
- Adhere materials within 15 minutes
- Position material to be bonded and press firmly for full contact with adhesive
-
-
- For subfloors:
-
-
- Apply adhesive to joists for one sheet at a time
- Nail or screw each sheet as recommended by the American Plywood Association
-
-
- Cleanup:
-
-
- Tools and adhesive may be cleaned with acetone or mineral spirits
- Follow solvent vendor’s precautions
-
-
- Limitations:
-
-
- Not designed for continuous submersion or for use on plastics, polystyrene or polyethylene foams
- Do not adhere one non-porous material to another as this will slow or prevent drying
-
-
Certifications:
- Class 1/8″ TYPE P/O Subfloor Adhesive in accordance with:
-
-
- ASTM D3498-19
- APA AFG-01
- ASTM C557
-
-
- Exceeds the requirements of CAN/CGSB-71.25M and CAN/CGSB-71.26M specifications
