Description
Makita TD001GZ XGT 40V Max Brushless 1/4″ Impact Driver-Tool Only
The Makita TD001GZ XGT 40V Max Brushless 1/4″ Impact Driver-Tool Only includes:
- Tool only – batteries and charger sold separately
- Belt hook
Features:
- Product no. TD001GM103
- 4 stage impact speed selection + TEK 1, TEK 2, ‘Cam-Out’ and Bolt modes:
-
-
- Ensure precise fastening and prevent damage to fasteners
-
-
- ‘Cam-out’ elimination mode:
-
-
- Operates at low speed until fastening begins to eliminate ‘cam-out’ and cross-threading
-
-
- BOLT MODE with 3 forward and 3 reverse auto stop modes:
-
-
- Stop impact and rotation to ensure consistent and precise fastening
-
-
- 2-stage TEK modes:
-
-
- Reduce impact power during final stages of fastener seating in thick or thin metal
-
-
- Quick-change memory mode:
-
- Allows operator to rapidly toggle between two registered settings
-
- Enhanced anvil holder rigidity with ball bearings reduces bit wobbling
- Brushless motor
-
-
- Generates less heat buildup
- Ideal for use in prolonged manufacturing / production applications
-
-
- Automatic Feedback Technology (AFT):
-
-
- Shuts tool down when rotation speed drops suddenly
-
-
- eXtreme Protection Technology (XPT):
-
-
- Maximizes protection against dust, dirt and debris
- Optimizes performance in extreme conditions
-
-
- Battery protection system provides:
-
-
- Over-discharge protection
- Temperature protection
- Circuit protection
- Enhanced performance, battery cycle life and overall battery life
-
-
- Constant speed control maintains constant speed under heavy load
- Twin LED job lights with pre-glow and afterglow
- Ergonomic soft rubber grip for vibration absorption and comfortable operation
Specifications:
- Maximum Fastening Torque: 1,950 in-lbs (220 Nm)
- No Load Speed ranges:
-
-
- High – 0 to 3,700 RPM
- Medium – 0to 2,100 RPM
- Low – 0 to 1,800 RPM
-
-
- Impacts Per Minute ranges:
-
-
- High- 0 to 4,400 IPM
- Medium – 0 to 2,600 IPM
- Low – 0 to 1,100 IPM
-
-
- Maximum Capacities:
-
-
- Machine screw: 5/32″ to 5/16″ (4 mm to 8 mm)
- Standard bolt: 3/16″ to 5/8″ (M5 to M14)
- High tensile bolt: 3/16″ to 9/16″ (M5 to M14)
-
-
- Vibration level: 10 m/s2
- Noise level: 96 dB(A)
- Overall length: 4-3/4″ (120 mm)
- Net weight: 2.3 lbs (1.0 kg)
Click here for more Makita Impact Drivers
Click here for a selection of Makita Driver Bits
Makita TD001G XGT Impact Driver Modes | |||
Mode | Max. IPM | Description | Application |
4 (Max) | 4,400 IPM | Max. force and speed | Driving long screws or tightening bolts |
3 (Hard) | 3,600 IPM | Increased control |
|
2 (Medium) | 2,600 IPM | Driving finishing screws | |
1 (Soft) | 1,100 IPM | Least force and speed | Fastening small screws |
Wood | 4,400 IPM | Starts slow, ends fast | Fastening long screws |
Tek Mode 1 | – | Starts slow, ends as impact begins | Self-drilling in thin metal |
Tek Mode 2 | 2,600 IPM | Starts fast, slows as impact begins | Self-drilling in thick metal |
Bolt Mode 1 | – | CW – Stops as soon as impacts begin
CCW – Stops as soon as impacts end |
CW (Clockwise) prevents over-tightening of bolts
CCW (Counter-Clockwise) use when loosening bolts |
Bolt Mode 2 | – | CW – Stops as soon as impacts begin
CCW – Stops as soon as impacts end |
|
Bolt Mode 3 | – | CW – Stops as soon as impacts begin
CCW – Stops as soon as impacts end |
Reviews
There are no reviews yet.