Description
Makita DLX2455TX4 18V LXT Brushless Cordless 2-Tool Combo Kit
The Makita DLX2455TX4 18V LXT Brushless Cordless 2-Tool Combo Kit includes:
- DHP486Z 1/2″ Cordless Hammer Drill / Driver with Brushless Motor
- DTD172Z 1/4″ Cordless Impact Driver with Brushless Motor
- Two 196675-2 18V (5.0 Ah) Li-Ion Batteries BL1850B
- DC18RC Rapid Charger
- 14″ Tool Bag
DHP486Z 18V LXT 1/2″ Cordless Hammer Drill with Brushless Motor:
Maximum capacities:
- Concrete:
-
-
- 5/8″ (16 mm)
-
-
- Steel:
-
-
- 1/2″ (13 mm)
-
-
- Wood with:
-
-
- Auger bit: 2″ (50 mm)
- Self-feed bit: 3″ (76 mm)
- Hole saw: 6″ (152 mm)
-
-
Features:
- Brushless DC motor:
-
-
- High power to weight and size ratio
- Generates less heat buildup
- Ideal for prolonged use in manufacturing / production applications
-
-
- eXtreme Protection Technology (XPT):
-
-
- Maximizes protection against dust, debris and liquids
- Optimizes performance in extreme conditions
-
-
- Battery protection system:
-
-
- Provides over-discharge, temperature and circuit protection
- Enhances performance, battery cycle life and overall battery life
-
-
- 21 clutch settings + drill mode deliver up to 1,150 in. lbs. of torque
- All metal gears for more efficient power transmission
- Ultra-compact design (only 7″ long)
- Dual LED job lights with afterglow feature
- Ergonomic soft rubber grip design:
-
-
- For vibration absorption and comfortable operation
- Features re-contoured rear grip portion and ribbed grip for improved hold
-
-
Specifications:
- Battery voltage & chemistry: 18V Lithium-Ion
- No load speed ranges:
-
-
- Low: 0 to 550 RPM
- High: 0 to 2,100 RPM
-
-
- Blows Per Minute ranges:
-
-
- Low: 0 to 8,250 BPM
- High: 0 to 31,500 BPM
-
-
- Maximum torque: 1,150 in-lbs (130 Nm)
- Vibration level: 8.0 m/s²
- Noise level: 84 dB(A)
- Overall length: 7″ (178 mm)
- Net weight: 4.5 lbs (2.0 kg)
DTD172Z 18V LXT Cordless 1/4″ Hex Impact Driver with XPT:
Features:
- 4 Stage Impact Power Selection Modes:
-
-
- Ensure precise fastening and prevent damage to fasteners
- TEK 1
- TEK 2
- Cam-Out
- Auto-Stop
-
-
- ‘Cam-out’ Elimination mode:
-
-
- Operates at low speed until fastening begins to eliminate ‘cam-out’ and cross-threading
-
-
- 2-Stage TEK modes:
-
-
- Reduce impact power during final stages of fastener seating in thick or thin metal
-
-
- Auto stop mode:
-
-
- Stops impact and rotation in 0.2 seconds after fastener is loosened (when trigger is fully depressed in reverse rotation)
-
-
- Quick-change memory mode allows operator to rapidly toggle between two registered settings
- Light mode allows operator to engage LED light for use as a worklight in dark areas
- Enhanced anvil holder rigidity with ball bearings reduces bit wobbling
- LED charge level indicator displays approximate remaining battery power
- Brushless DC motor:
-
-
- High power to weight and size ratio
- Generates less heat buildup
- Ideal for prolonged use in manufacturing / production applications
-
-
- eXtreme Protection Technology (XPT):
-
-
- Maximizes protection against dust, debris and liquids
- Optimizes performance in extreme conditions
-
-
- Battery protection system:
-
-
- Provides over-discharge, temperature and current protection
- Enhanced performance, battery cycle life and overall battery life
-
-
- Twin LED job lights with pre-glow and afterglow features
- Ergonomic soft rubber grip design for vibration absorption and comfortable operation
Specifications:
- Battery voltage and chemistry: 18 volt Lithium ion
- Shank size and type: 1/4″ Hex
- No load speed ranges:
-
-
- 0 to 1,100 RPM
- 0 to 2,100 RPM
- 0 to 3,200 RPM
- 0 to 3,600 RPM
-
-
- Impacts per minute ranges:
-
-
- 0 to 1,100 IPM
- 0 to 2,600 IPM
- 0 to 3,600 IPM
- 0 to 3,800 IPM
-
-
- Maximum torque: 1,590 in-lbs (180 Nm)
- Vibration level: 13.5 m/s2
- Noise level: 97 dB(A)
- Overall length: 4-1/2″ (114 mm)
- Net weight: 1.8 lbs (0.8 kg)
Looking for driver bits? Click here.
Reviews
There are no reviews yet.