Makita DK0139G203 40V Max XGT 2PC Combo 4.0 Ah Kit TW001GZ+GA013GZ

Description

Makita DK0139G203 40V Max XGT 2PC Combo 4.0 Ah Kit TW001GZ+GA013GZ

The Makita DK0139G203 40V Max XGT 2PC Combo 4.0 Ah Kit TW001GZ+GA013GZ includes:

• TW001GZ 40V MAX XGT Li-Ion 3/4” Impact Wrench with Brushless Motor
• GA013GZ 40V MAX XGT Li-Ion 5” Angle Grinder (Paddle Switch) with Brushless Motor
• 2 – BL4040 40V Max (4.0Ah) Li-Ion Batteries
• DC40RA Rapid Charger
• Tool Bag (832319-7)

TW001GZ XGT 40V Max Brushless 3/4″ Impact Wrench – Friction Ring:

Features:

• Friction Ring detent pin
• Brushless Motor:
  • • • Generates less heat buildup
      • Ideal for use in prolonged manufacturing / production applications
• eXtreme Protection Technology (XPT):
  • • • Maximizes protection against dust, dirt and debris
      • Optimizes performance in extreme conditions
• Battery vibration suppression protects the battery
• Optimized application selector with 6 modes adapting speed and impacts for each task
• Full speed mode shortens the distance of trigger travel required to hit full speed
• 4 Stage impact power selection for optimum RPM and fastening torque
• 3 Forward and 3 Reverse auto stop modes:
  • • • Stop impact and rotation at preset levels
      • Ensure fastening accuracy
      • Prevent over/under tightening of fasteners
• Twin LED job lights with pre-glow and after-glow  illuminate work area
• Ergonomic soft rubber grip for vibration absorption and comfortable operation

Specifications:

• Battery voltage and chemistry: 40V Lithium Ion
• Drive size and type: 3/4″ Square
• Max. Fastening Torque: 1,330 ft. lbs (1,800 Nm)
• Capacities:
  • • • Standard bolt: 1/2″ to 1-7/16″ (M14 to M36)
      • High tensile bolt: 3/8″ to 1-1/16″ (M10 to M27)
• No load speed ranges:
  • • • Soft Impact mode: 0 to 950 RPM
      • Medium impact mode: 0 to 1,150 RPM
      • Hard impact mode: 0 to 1,400 RPM
      • Max impact mode: 0 to 1,800 RPM
• Impacts per minute ranges:
  • • • Soft Impact mode: 0 to 1,900 IPM
      • Medium impact mode: 0 to 2,200 IPM
      • Hard impact mode: 0 to 2,400 IPM
      • Max impact mode: 0 to 2,500 IPM
• Vibration level: 18.5 m/s²
• Noise level: 100 dB(A)
• Overall length: 8-1/2″ (217 mm)
• Net weight: 8.6 lbs (3.9 kg)

Click here for a selection of 3/4″ Drive Impact Sockets

GA013GZ XGT 40V Max Brushless 5″ Angle Grinder – Paddle Switch:

Features:

• Paddle switch
• Brushless motor
  • • • Generates less heat buildup
      • Ideal for use in prolonged manufacturing / production applications
• Active Feedback Technology (AFT) shuts down the tool in the event of a kickback
• eXtreme Protection Technology (XPT):
  • • • Maximizes protection against dust, dirt and debris
      • Optimizes performance in extreme conditions
• Electric brake stops wheel or disc 3 to 5 seconds after switch is released
• Soft start gradually increases speed to eliminate start up shock
• Anti-restart
  • • • Prevents accidental start up of tool during battery changing when switch locked on
• Electronic current limiter protects motor from accidental overload
• Battery protection system provides:
  • • • Over-discharge protection
      • Temperature protection
      • Circuit protection
      • Enhanced performance, battery cycle life and overall battery life
• Integrated dust screens act as additional protection against dust, dirt and debris
• Slim, ergonomic soft rubber grip design for vibration absorption and comfortable operation

Maximum capacities:

• Grinding depressed center wheels: 5″
• Cut-off discs: 5″
• Sanding discs: 5″

Specifications:

• Battery voltage and chemistry: 40V Lithium Ion
• Grinding wheel diameter: 5″ (125 mm)
• Arbor size: 5/8″-11 UNC
• No load speed: 8,500 RPM
• Vibration level: 6.0 m/s²
• Noise level: 82 dB(A)
• Net weight: 5.1 lbs (2.3 kg)
• Overall length: 16-1/8″ (410 mm)