Name: Badger 463110 Nylon Framer Tool Belt Set - Gunmetal Grey
SKU: 1512675
Availability: BackOrder

Description

Badger 463110 Nylon Framer Tool Belt Set – Gunmetal Grey

Badger 463110 Nylon Framer Tool Belt Set – Gunmetal Grey:

Product series: 463110
Type: Framer set
Handed: Right Handed
Color: Gunmetal Grey
Sizes: S-M-L-XL-2XL
Plenty of room for all your tools and fasteners
Contoured belt with metal COBRA® buckle:
- - - Helps support and distribute the added weight
Badger’s longest bags at about 17″ from top to bottom
- - - Keep that in mind if length is a concern
Dominant side features:
- - - Tape pouch
    - 5 Tool slots in main pouch (3 along the inside back and 2 inside of front)
    - 2 Stacked lower pouches with a tool slot in the middle one
    - Rear tool loop
    - Pencil/utility combo up front with three narrow slots and one deep pocket
Non-dominant side features:
- - - Tape pouch with 4 interior 1″ wide elastic slots
    - Speed square slot in main pouch with wide tool slot below
    - Fastener pouch with slot
    - Lower fastener pouch
    - 2 Front tool pockets
    - 2 Stacked rear tool slots
    - Reinforced bar sleeve on the underside of the bag
Bottom of the main pouch:
- - - Reinforced with USA made tactical webbing
    - Increases puncture and abrasion resistance

Badger Belt Sizing Guide
Size	Belt Pad Length	Belt Height Measurement
Small	29″	31″ to 35″
Medium	33″	35″ to 39″
Large	37″	39″ to 43″
X-Large	41″	43″ to 47″
XX-Large	45″	47″ to 55″
To ensure you get the belt that will offer you the most flexibility, it’s important that you read and follow these instructions. DO NOT base your choice on your pants size. Take a string or tape measure and measure snugly where you plan to wear your tool belt. Belts are typically worn on the hips. This area tends to be wider than where your pants sit. For example, if you wear a size 33” waist jeans, but measure a 37” around the hips, where you like to wear your tool belt. Keep in mind your working conditions. If you work outside in all seasons, layers will increase your circumference. Badger belts have around four or five inches of flexibility for the best fit. This is more than enough for most people. For an optimal fit, there should be 2″ to a max of 6″ of open space between your belt ends. For instance, if your measurement is 36”, you should go with a MD belt which will leave about 3” of open space. Keep in mind, if you prefer your bags to sit further back, order on the small side.

Weight	4 lbs
Brand Name	Badger Belts
Clothing Size	Small, Medium, Large, X-Large, 2X-Large

There are no reviews yet.

Be the first to review “Badger 463110 Nylon Framer Tool Belt Set – Gunmetal Grey”