Description
Badger 461010LH Series Gunmetal Grey Carpenter Tool Belt Set – Left Handed
The Badger 461010LH Series Gunmetal Grey Carpenter Tool Belt Set – Left Handed:
- Product series: 461010LH
- Type: Carpenter set
- Handed: Left-handed
- Color: Gunmetal Gray
- Tool Side:
-
-
- Five tool slots in the main pouch
- Three slots along inside back
- Two slots inside front
- Single outside lower pouch with tool slot
- Rear tool loop
- Pencil/utility combo up front with three small slots and one deep pocket
-
-
- Fastener Side:
-
-
- 3 Elastic nail set slots in tape pouch
- Speed square slot
- Lower tool slot
- Side by side outside pouches
- Slots in each fastener pouch
- Reinforced bar slot on the underside of the bag
-
-
- COBRA Metal buckles:
-
-
- Only foreign-made component in the Badger system
-
-
- US government has made a waiver to the berry amendment (Military must use and wear only domestically made gear):
-
-
- Allows the use of the Austrian made buckles throughout the US military simply because they are that good
-
-
- 1000 denier CORDURA nylon fabric with water repellent coating
- American made foam
- Various military-grade tactical webbings designed to be both lightweight and abrasion-resistant
- Plastic and metal military hardware and heavyweight military thread
Click here for more Badger Tool Belts
| Badger Belt Sizing Guide | ||
| Size | Belt Pad Length | Belt Height Measurement |
| Small | 29″ | 31″ to 35″ |
| Medium | 33″ | 35″ to 39″ |
| Large | 37″ | 39″ to 43″ |
| X-Large | 41″ | 43″ to 47″ |
| XX-Large | 45″ | 47″ to 55″ |
| To ensure you get the belt that will offer you the most flexibility, it’s important that you read and follow these instructions. DO NOT base your choice on your pants size. Take a string or tape measure and measure snugly where you plan to wear your tool belt. Belts are typically worn on the hips. This area tends to be wider than where your pants sit. For example, if you wear a size 33” waist jeans, but measure a 37” around the hips, where you like to wear your tool belt. Keep in mind your working conditions. If you work outside in all seasons, layers will increase your circumference. Badger belts have around four or five inches of flexibility for the best fit. This is more than enough for most people. For an optimal fit, there should be 2″ to a max of 6″ of open space between your belt ends. For instance, if your measurement is 36”, you should go with a MD belt which will leave about 3” of open space. Keep in mind, if you prefer your bags to sit further back, order on the small side. | ||
Reviews
There are no reviews yet.