Makita 2-Piece Combo Kits with 4.0Ah and 5.0Ah Batteries
| Model no. | Description | Combo Kit Model no. | ||||
| 4.0 Ah batteries |
5.0 Ah batteries | |||||
| DLX2005M | DLX2015M | DLX2176M | DLX2005T | DLX2176T | ||
| DHP458Z | 1/2″ Hammer Drill / Driver | X | X | |||
| DHP481Z | 1/2″ Hammer Drill / Driver w/ Brushless Motor | X | X | |||
| DDF458Z | 1/2″ Drill / Driver | X | ||||
| DTD152Z | 1/4″ Impact Driver | X | X | X | ||
| DTD154Z | 1/4″ Impact Driver w/ Brushless Motor | X | X | |||
Makita 2-Piece Combo Kits with 3.0Ah Batteries
| Model no. | Description | Combo Kit Model no. | ||
| 3.0Ah Batteries | ||||
| LXT211 | LXT220 | DLX2180S | ||
| DHP482Z | 1/2″ Hammer Drill / Driver | X | ||
| DHP484Z | 1/2″ Hammer Drill / Driver w/ Brushless Motor | X | ||
| DDF482Z | 1/2″ Drill / Driver | X | ||
| DTD152Z | 1/4″ Impact Driver | X | X | |
| DTD153Z | 1/4″ Impact Driver w/ Brushless Motor | X | ||
Brushless Advantage
- More power in a more compact package.
- Less down time – no brushes to replace.
- Less heat buildup, less friction and lower amp draw give you longer tool life and longer run time on a battery charge.
Hammer/Drill/Driver VS Drill/Driver
- Choose the hammer option if you will be drilling in concrete.
- The DHP series has the Hammer mode for drilling into concrete
Number of Speed Ranges (1, 2 or 3)
- More ranges mean the tool can be used in a wider variety of applications.
- Matching the speed range to the application uses less battery power and increases run time
Torque
- Choose the torque rating that works best for your application.
- The DHP481Z Hammer drill and DDF481Z Drill Driver have the highest torque ratings.
Drilling capacities
- More power means you can drill larger holes.
- In TEK mode the impact driver starts off at the highest speed and power setting.
- When there is an increase in fastener resistance, the impactor automatically shifts down to a lower speed setting for final tightening.
- TEK Mode prevents over tightening of fasteners and helps minimize thread stripping while increasing overall fastening speed.
- Only available on the DTD154Z impact driver.
Drill / Drivers with and without Hammer Mode
| Model No. | BRUSHLESS | HAMMER | 2 SPEED RANGES (RPM) |
2 HAMMER RANGES (BPM) |
MAXIMUM TORQUE (in. lbs) |
CAPACITIES | USED IN COMBO KIT |
| DHP458Z | No | Yes | 0 – 400 0 – 2,000 |
0 – 6,000 0 – 30,000 |
750 | 1/2″ steel 3″ wood 5/8″ concrete |
DLX2005M DLX2005T |
| DHP481Z | Yes | Yes | 0 – 550 0 – 2,100 |
0 – 8,250 0 – 31,500 |
1,090 | 1/2″ steel 3″ wood 5/8″ concrete |
DLX2176M DLX2176T |
| DHP482Z | No | Yes | 0 – 600 0 – 1,900 |
0 – 9,000 0 – 28,500 |
480 | 1/2″ steel 1-1/2″ wood 1/2″ concrete |
LXT211 |
| DHP484Z | Yes | Yes | 0 – 500 0 – 2,000 |
0 – 7,500 0 – 30,000 |
530 | 1/2″ steel 1-1/2″ wood 1/2″ concrete |
DLX2180S |
| DDF458Z | No | No | 0 – 400 0 – 2,000 |
N/A | 750 | 1/2″ steel 3″ wood |
DLX2015M |
| DDF482Z | No | No | 0 – 600 0 – 1,900 |
N/A | 480 | 1/2″ steel 1-1/2″ wood |
LXT220 |
Impact Driver
| BRUSHLESS | SPEED RANGES | NO LOAD SPEED (RPM) |
IMPACTS PER MINUTE (IPM) |
MAXIMUM TORQUE (in. lbs) |
TEK MODE | USED IN COMBO KIT |
|
| DTD152Z | No | 1 | 0 – 2,900 | 0 – 3,500 | 1,460 | No | DLX2005M DLX2005T DLX2015M LXT211 LXT220 |
| DTD153Z | Yes | 1 | 0 – 3,400 | 0 -3,600 | 1,500 | No | DLX2180S |
| DTD154Z | Yes | 3 | 0 – 1,100 0 – 2,100 0 – 3,600 |
0 – 1,100 0 – 2,600 0 – 3,800 |
1,550 | Yes | DLX2176M DLX2176T |