Description
Jet 408852 3 PC Air Filter, Regulator and Lubricator 1/4″ NPT
The Jet 408852 3 PC Air Filter, Regulator and Lubricator 1/4″ NPT:
- Product no. 408852
- Model no. AFRLMM14
- 3-Piece Modular Filter, Regulator and Lubricator air preparation unit
- Filter, Regulator and Lubricator are connected together using spacers and piping adaptors
- The components are easily removable or mountable without disturbing the pipe line
- Fully modular for easy maintenance
- Modular mounting
- Designed for maximum flow
- Each unit is 100% factory tested and certified for guaranteed performance
- Maximum Working Air Pressure: 145 PSI
- Ambient Temperature: 0º C to 60º C (32º F to 140º F)
- Inlet Pressure: 105 PSI (7 BAR)
- Set Pressure: 90 PSI (6 BAR)
- Pressure Drop: 17 PSI (1.0 BAR)
- Pressure Adjustment Range: 7 to 145 PSI (0.5 to 10 BAR)
Air Filter:
- Prevents dust, water and other impurities from reaching air tools for longer tool life
- Die cast aluminum filter head construction
- Polycarbonate bowl with a steel bowl guard
- High performance sintered Bronze filtering element
- 40 micron filtering element
- Equipped with a Separator & Shield for efficient moisture separation
- Press type manual drain with “Night Time Drain” feature
- “Night Time Drain” automatically drains the bowl when the compressed air supply to the filter is switched off
Air Pressure Regulator:
- Used to maintain a steady outlet pressure, unaffected by variations/fluctuations in the inlet pressure
- Regulators step down the air line pressure and can be set at any pressure below the inlet pressure
- Die cast aluminum body construction
- Equipped with a non-raising “Press to Lock” adjusting knob for locking at any set pressure
- Works on a diaphragm-operated relieving type mechanism with the pressure compensated by balanced poppet
- JET air regulators can be installed in any position
Lubricator:
- Used to feed lubricants to pneumatic equipment
- Designed to maintain a constant oil-to-air density over a wide range of flow
- Are fog/micro mist type lubricators for up to 50 ft. pipe runs
- Die cast aluminum head
- Polycarbonate bowl with a steel bowl guard
- Lubricator head is equipped with an oil drop indicator, oil drop controller and oil filling plug
- WARNING: Polycarbonate bowls may be damaged & possibly fail if exposed to synthetic oils, thinner, solvents, trichloroethylene, kerosene or other aromatic hydrocarbons
Wetted Components:
- Aluminum
- Bronze
- Brass
- Steel
- Acetal
- Polycarbonate
- Stainless Steel
- Nitrile
3 PC Air Filter, Regulator and Lubricator Specification & Comparison Chart |
|||||
Product no. | 408852 | 408855 | 408856 | 408857 | 408858 |
Model no. | AFRLMM14 | AFRLMI38 | AFRLMS12 | AFRLMH34 | AFRLMH1 |
Description | Miniature | Intermediate | Standard | Heavy Duty | Heavy Duty |
Bowl Guard Type | Steel/Threaded | Steel/Bayonet | |||
Regulator Venturi for Flow Compensation | No | Built-in | |||
Port Size | 1/4″ | 3/8″ | 1/2″ | 3/4″ | 1″ |
Max. Flow Rate (CFM) | 18 | 71 | 123 | 123 | 175 |
Max. Flow Rate (LPM) | 500 | 2,00 | 3,500 | 3,500 | 5,000 |
Pressure Gauge Port Size | 1/8″ | 1/4″ | |||
Filter Bowl Size (oz) | 0.3 | 1.08 | 1.5 | 5.6 | 5.6 |
Filter Bowl Size (ml) | 9 | 32 | 44 | 165 | 165 |
Lubricator Bowl Size (oz) | 0.68 | 1.93 | 5.17 | 6.8 | 6.8 |
Lubricator Bowl Size (ml) | 20 | 57 | 152 | 200 | 200 |
Height (in.) | 6.69 | 8.66 | 11.02 | 14.6 | 14.6 |
Height (mm) | 170 | 220 | 280 | 370 | 370 |
Width (in.) | 7.78 | 9.84 | 12.00 | 14.6 | 14.6 |
Width (mm) | 200 | 250 | 305 | 370 | 370 |
Reviews
There are no reviews yet.