Nuco 30208 NuFlex General Purpose Silicone Sealant – Translucent 300ml

Description

Nuco 30208 NuFlex General Purpose Silicone Sealant – Translucent 300ml

Nuco 30208 NuFlex General Purpose Silicone Sealant – Translucent 300ml:

Features:

• Product no. 30208
• Color: Translucent
• Container size: 300ml
• Medium modulus one-component acetoxy cure, non-sag caulking material
• Acetoxy cure
• 100% silicone
• GREENGUARD GOLD Certification
• Certified by NSF
• Water-resistant before, during, and after cure
• RTV (Room Temperature Vulcanization)
• Adheres to many substrates
• Wide temperature range performance
• 50-year durability
• Can be applied in sub-zero temperatures
• Bonds to:
  • • • Metal
      • Laminates
      • Glass
      • Wood
      • Silicone resin
      • Vulcanized silicone rubber
      • Ceramic
      • Natural and synthetic fibres
      • Painted surfaces
      • Most plastics
• Basic uses include caulking and sealing around:
  • • • Form-in place gaskets where there is no oil contact
      • Duct joints
      • Areas that need weather stripping
      • Sinks, basins, showers, and tubs
• Other uses include:
  • • • General repairs on a variety of substrates
      • Non-load-bearing bonding
      • Non-stick coating for concrete molds and forms

Specifications:

• ASTM C 611 – Durometer Hardness, Shore A: 25
• ASTM D 412 Die C – Tensile Strength, MPa (psi): 2.25 (325)
• ASTM D 150 – Dissipation Factor at 60 Hz, 100 Hz, and 100 kHz: 0.0015
• ASTM C 1299 – Service Temperature, °C: -51 – 230
• ASTM D 149 – Dielectric Strength, kV/mm (V/mil): 21.7 (550)
• ASTM D 257 – Volume Resistivity , OHM-cm: 1.5×10¹⁵
• Thermal Conductivity, Cal/(s)(°C)(cm): 4.5 x 10⁴
• ASTM S 2137 A – Volume Coefficient of Thermal Expansion: 0°-100°C 9.3×10⁴
• ASTM D 746 – Brittle Point, °C: -62
• Tack free time (min) (25°C, 50% RH): 10 – 20
• Flow Rate: Nil, non- sag
• Specific Gravity (g/mL): 1.01
• ASTM C 603 – Application Temperature, °C: -29 – 50
• ASTM D 412 Die C – Elongation, percent: 550
• Extrusion Rate (3.2 mm orifice, 90 psi) g/min: 400
• ASTM D 150 – Dielectric Constant at 60 Hz, 100 Hz, and 100 kHz: 2.8

Click here for more Nuco products