Makita DLX2455TX4 18V LXT Brushless Cordless 2-Tool Combo Kit

Description

Makita DLX2455TX4 18V LXT Brushless Cordless 2-Tool Combo Kit

The Makita DLX2455TX4 18V LXT Brushless Cordless 2-Tool Combo Kit includes:

• DHP486Z 1/2″ Cordless Hammer Drill / Driver with Brushless Motor
• DTD172Z 1/4″ Cordless Impact Driver with Brushless Motor
• Two 196675-2 18V (5.0 Ah) Li-Ion Batteries BL1850B
• DC18RC Rapid Charger
• 14″ Tool Bag

DHP486Z 18V LXT 1/2″ Cordless Hammer Drill with Brushless Motor:

Maximum capacities:

• Concrete:
  • • • 5/8″ (16 mm)
• Steel:
  • • • 1/2″ (13 mm)
• Wood with:
  • • • Auger bit: 2″ (50 mm)
      • Self-feed bit: 3″ (76 mm)
      • Hole saw: 6″ (152 mm)

Features:

• Brushless DC motor:
  • • • High power to weight and size ratio
      • Generates less heat buildup
      • Ideal for prolonged use in manufacturing / production applications
• eXtreme Protection Technology (XPT):
  • • • Maximizes protection against dust, debris and liquids
      • Optimizes performance in extreme conditions
• Battery protection system:
  • • • Provides over-discharge, temperature and circuit protection
      • Enhances performance, battery cycle life and overall battery life
• 21 clutch settings + drill mode deliver up to 1,150 in. lbs. of torque
• All metal gears for more efficient power transmission
• Ultra-compact design (only 7″ long)
• Dual LED job lights with afterglow feature
• Ergonomic soft rubber grip design:
  • • • For vibration absorption and comfortable operation
      • Features re-contoured rear grip portion and ribbed grip for improved hold

Specifications:

• Battery voltage & chemistry: 18V Lithium-Ion
• No load speed ranges:
  • • • Low: 0 to 550 RPM
      • High: 0 to 2,100 RPM
• Blows Per Minute ranges:
  • • • Low: 0 to 8,250 BPM
      • High: 0 to 31,500 BPM
• Maximum torque: 1,150 in-lbs (130 Nm)
• Vibration level: 8.0 m/s²
• Noise level: 84 dB(A)
• Overall length: 7″ (178 mm)
• Net weight: 4.5 lbs (2.0 kg)

DTD172Z 18V LXT Cordless 1/4″ Hex Impact Driver with XPT:

Features:

• 4 Stage Impact Power Selection Modes:
  • • • Ensure precise fastening and prevent damage to fasteners
      • TEK 1
      • TEK 2
      • Cam-Out
      • Auto-Stop
• ‘Cam-out’ Elimination mode:
  • • • Operates at low speed until fastening begins to eliminate ‘cam-out’ and cross-threading
• 2-Stage TEK modes:
  • • • Reduce impact power during final stages of fastener seating in thick or thin metal
• Auto stop mode:
  • • • Stops impact and rotation in 0.2 seconds after fastener is loosened (when trigger is fully depressed in reverse rotation)
• Quick-change memory mode allows operator to rapidly toggle between two registered settings
• Light mode allows operator to engage LED light for use as a worklight in dark areas
• Enhanced anvil holder rigidity with ball bearings reduces bit wobbling
• LED charge level indicator displays approximate remaining battery power
• Brushless DC motor:
  • • • High power to weight and size ratio
      • Generates less heat buildup
      • Ideal for prolonged use in manufacturing / production applications
• eXtreme Protection Technology (XPT):
  • • • Maximizes protection against dust, debris and liquids
      • Optimizes performance in extreme conditions
• Battery protection system:
  • • • Provides over-discharge, temperature and current protection
      • Enhanced performance, battery cycle life and overall battery life
• Twin LED job lights with pre-glow and afterglow features
• Ergonomic soft rubber grip design for vibration absorption and comfortable operation

Specifications:

• Battery voltage and chemistry: 18 volt Lithium ion
• Shank size and type: 1/4″ Hex
• No load speed ranges:
  • • • 0 to 1,100 RPM
      • 0 to 2,100 RPM
      •  0 to 3,200 RPM
      •  0 to 3,600 RPM
• Impacts per minute ranges:
  • • • 0 to 1,100 IPM
      • 0 to 2,600 IPM
      • 0 to 3,600 IPM
      • 0 to 3,800 IPM
• Maximum torque: 1,590 in-lbs (180 Nm)
• Vibration level: 13.5 m/s²
• Noise level: 97 dB(A)
• Overall length: 4-1/2″ (114 mm)
• Net weight: 1.8 lbs (0.8 kg)

Looking for driver bits?  Click here.