Description
Makita DK0139G203 40V Max XGT 2PC Combo 4.0 Ah Kit TW001GZ+GA013GZ
The Makita DK0139G203 40V Max XGT 2PC Combo 4.0 Ah Kit TW001GZ+GA013GZ includes:
- TW001GZ 40V MAX XGT Li-Ion 3/4” Impact Wrench with Brushless Motor
- GA013GZ 40V MAX XGT Li-Ion 5” Angle Grinder (Paddle Switch) with Brushless Motor
- 2 – BL4040 40V Max (4.0Ah) Li-Ion Batteries
- DC40RA Rapid Charger
- Tool Bag (832319-7)
TW001GZ XGT 40V Max Brushless 3/4″ Impact Wrench – Friction Ring:
Features:
- Friction Ring detent pin
- Brushless Motor:
-
-
- Generates less heat buildup
- Ideal for use in prolonged manufacturing / production applications
-
-
- eXtreme Protection Technology (XPT):
-
-
- Maximizes protection against dust, dirt and debris
- Optimizes performance in extreme conditions
-
-
- Battery vibration suppression protects the battery
- Optimized application selector with 6 modes adapting speed and impacts for each task
- Full speed mode shortens the distance of trigger travel required to hit full speed
- 4 Stage impact power selection for optimum RPM and fastening torque
- 3 Forward and 3 Reverse auto stop modes:
-
-
- Stop impact and rotation at preset levels
- Ensure fastening accuracy
- Prevent over/under tightening of fasteners
-
-
- Twin LED job lights with pre-glow and after-glow illuminate work area
- Ergonomic soft rubber grip for vibration absorption and comfortable operation
Specifications:
- Battery voltage and chemistry: 40V Lithium Ion
- Drive size and type: 3/4″ Square
- Max. Fastening Torque: 1,330 ft. lbs (1,800 Nm)
- Capacities:
-
-
- Standard bolt: 1/2″ to 1-7/16″ (M14 to M36)
- High tensile bolt: 3/8″ to 1-1/16″ (M10 to M27)
-
-
- No load speed ranges:
-
-
- Soft Impact mode: 0 to 950 RPM
- Medium impact mode: 0 to 1,150 RPM
- Hard impact mode: 0 to 1,400 RPM
- Max impact mode: 0 to 1,800 RPM
-
-
- Impacts per minute ranges:
-
-
- Soft Impact mode: 0 to 1,900 IPM
- Medium impact mode: 0 to 2,200 IPM
- Hard impact mode: 0 to 2,400 IPM
- Max impact mode: 0 to 2,500 IPM
-
-
- Vibration level: 18.5 m/s2
- Noise level: 100 dB(A)
- Overall length: 8-1/2″ (217 mm)
- Net weight: 8.6 lbs (3.9 kg)
Click here for a selection of 3/4″ Drive Impact Sockets
GA013GZ XGT 40V Max Brushless 5″ Angle Grinder – Paddle Switch:
Features:
- Paddle switch
- Brushless motor
-
-
- Generates less heat buildup
- Ideal for use in prolonged manufacturing / production applications
-
-
- Active Feedback Technology (AFT) shuts down the tool in the event of a kickback
- eXtreme Protection Technology (XPT):
-
-
- Maximizes protection against dust, dirt and debris
- Optimizes performance in extreme conditions
-
-
- Electric brake stops wheel or disc 3 to 5 seconds after switch is released
- Soft start gradually increases speed to eliminate start up shock
- Anti-restart
-
-
- Prevents accidental start up of tool during battery changing when switch locked on
-
-
- Electronic current limiter protects motor from accidental overload
- Battery protection system provides:
-
-
- Over-discharge protection
- Temperature protection
- Circuit protection
- Enhanced performance, battery cycle life and overall battery life
-
-
- Integrated dust screens act as additional protection against dust, dirt and debris
- Slim, ergonomic soft rubber grip design for vibration absorption and comfortable operation
Maximum capacities:
- Grinding depressed center wheels: 5″
- Cut-off discs: 5″
- Sanding discs: 5″
Specifications:
- Battery voltage and chemistry: 40V Lithium Ion
- Grinding wheel diameter: 5″ (125 mm)
- Arbor size: 5/8″-11 UNC
- No load speed: 8,500 RPM
- Vibration level: 6.0 m/s2
- Noise level: 82 dB(A)
- Net weight: 5.1 lbs (2.3 kg)
- Overall length: 16-1/8″ (410 mm)
Reviews
There are no reviews yet.