Makita DTW301XVZ 18V LXT BL 1/2” Impact Wrench with Detent Pin-Tool Only

Description

Makita DTW301XVZ 18V LXT BL 1/2” Impact Wrench with Detent Pin-Tool Only

The Makita DTW301XVZ 18V LXT BL 1/2” Impact Wrench with Detent Pin includes:

• Tool only – batteries and charger sold separately
• Hook

Also available with Friction Pin Anvil: DTW300XVZ 18V LXT BL 1/2” Impact Wrench with Friction Ring

Features:

• Product no. DTW301XVZ
• 1/2″ Square Drive
• Variable 4-Speed
• Reversible
• Electric Brake
• Detent Pin
• Brushless DC motor:
  • • • High power to weight and size ratio
      • Generates less heat buildup
      • Ideal for prolonged use in manufacturing / production applications
• Shielded motor suitable for use in high-voltage environments and applications
• 4-Stage impact power selection ensure precise fastening and prevents damage to fasteners or materials
• 3 Forward and 3 Reverse Auto Stop Modes:
  • • • Stop impact and rotation at pre-set levels
      • Ensure fastening accuracy
      • Prevent over/under tightening of fasteners
• Variable speed trigger:
  • • • Full speed mode features shorter trigger travel for reduced operator fatigue
• eXtreme Protection Technology (XPT):
  • • • Maximizes protection against dust, debris and liquids
      • Optimizes performance in extreme conditions
• Battery protection system:
  • • • Provides over-discharge, temperature and circuit protection
      • Enhances performance, battery cycle life and overall battery life
• Twin LED job light with pre-glow and after-glow feature and independent on/off switch
• Ergonomic soft rubber grip design for vibration absorption and comfortable operation

No Load Speed Ranges:

1. Soft Impact Mode: 0 to 1.000 RPM
2. Medium Impact Mode: 0 to 1,800 RPM
3. Hard Impact Mode: 0 to 2,600 RPM
4. Maximum Impact Mode: 0 to 3,200 RPM

Impacts Per Minute Ranges:

1. Soft Impact Mode: 0 to 1,800 IPM
2. Medium Impact Mode: 0 to 2,600 IPM
3. Hard Impact Mode: 0 to 3,400 IPM
4. Maximum Impact Mode: 0 to 4,000 IPM

Specifications:

• Battery voltage and chemistry: 18V lithium-ion
• Drive type: 1/2″ Square
• Anvil type: Detent Pin
• Maximum fastening torque: 240 ft-lbs (330 Nm)
• Nut-busting torque (reverse): 430 ft-lbs (580 Nm)
• Vibration level: 12.5 m/s²
• Noise level: 97 dB(A)
• Overall length: 5-5/8″ (144 mm)
• Net weight: 2.7 lbs (1.2 kg)