DeWalt DCK592L2 20V MAX Premium 5-Tool Combo Kit

Description

DeWalt DCK592L2 20V MAX Premium 5-Tool Combo Kit

The DeWalt DCK592L2 20V MAX Premium 5-Tool Combo Kit includes:

• DCD985 1/2″ Hammerdrill
• DCS380 Reciprocating Saw
• DCF885 1/4″ Impact Driver
• DCS391 6 1/2″ Circular Saw
• DCL040 LED Work Light
• 2 – 20V MAX 3.0 Ah Lithium Ion battery packs
• Fast charger
• 360º Side handle
• Belt hook
• Carbide tipped circular saw blade
• Contractor bag

1. DeWalt DCD985 20V Max 1/2″ Hammer Drill/Driver:

• High power, high efficiency motor
• 3-Speed All-Metal Transmission
• 1/2″ Metal-Ratcheting Chuck w/ carbide inserts for better bit-gripping strength
• LED job light with 20 second shutoff delay
• Maximum power: 535 UWO (Unit Watts Out)
• 360 degree adjustable side handle
• 3 speed settings
• Speed ranges: 0 to 575 RPM / 0 to 1,350 RPM / 0 to 2,000 RPM
• Maximum blows per minute: 0 to 9,775 BPM / 0 to 22,950 BPM / 0 to 34,000 BPM
• Clutch settings: 22
• Chuck size and type: 1/2″ metal ratcheting
• Tool weight: 3.9 lbs

2. Dewalt DCS380 20V Max Reciprocating Saw:

• 4 Position blade clamp with tool-free blade changes for flush cutting and easy re-positioning
• Pivoting adjustable shoe for longer blade life and better depth-of-cut control
• Variable speed trigger delivers better blade control and faster cutting speeds
• Rubber-covered grip for greater operator control and comfort
• Double oil sealed shaft resists contamination while increasing durability
• Electric brake for greater operator safety
• Strokes per minute: 0 to 3,000 SPM
• Stroke length: 1-1/8″
• Tool weight: 6.0 lbs

3. DeWalt DCF885 20V MAX 1/4″ Impact Driver:

• Compact and lightweight
• Fits into tight places
• 3 light LED fuel gauge system indicates state of charge
• 3 LED job lights strategically placed around the chuck provide illumination without shadows
• The lights turn on with the trigger and stay on 20 seconds after the trigger is released
• XR Lithium Ion batteries with fuel gauge delivers 33% greater capacity than standard packs
• One-handed loading chuck accepts bit tips as short as 1″
• Voltage: 20V MAX (maximum initial battery voltage without load – nominal voltage is 18V)
• Drive size: 1/4″ hex chuck
• Anvil type: Quick release
• No load speed: 0 to 3,700 RPM
• Impacts per minute: 0 to 3,200 IPM
• Maximum torque: 1,400 in. lbs (117 ft lbs)
• Length: 5.55″
• Weight: 3.4 lbs

Looking for impact driver bits?  Click here.

4. DeWalt DCS391 20V Max 6-1/2″ Circular Saw:

• 460 MWO, 3,700 RPM motor delivers the power and speed for the most demanding cuts
• Strong, lightweight magnesium shoe
• Rubber overmolded grip for greater comfort, control and balance
• Bevel capacity: 0 to 50 degrees
• Blade diameter: 6-1/2″
• Arbor size: 5/8″
• Depth of cut @ 45 degrees: 1-5/8″
• Depth of cut @ 90 degrees: 2-1/4″
• No load speed: 3,700 RPM
• Tool weight: 7.0 lbs

5. DeWalt DCL040 20V LED Work Light:

• 110 Lumens of bright LED output
• Integrated hook allows hands-free use in multiple placements
• Head rotates 120°
• LED technology delivers lower heat output compared to Xenon lights
• High efficiency LED bulb improves run-time
• Voltage: 20V MAX
• Run time: 11 hours
• Tool weight: 1.0 lbs