Red Head A7 Acrylic Adhesive

$36.92

Description

Red Head A7 Acrylic Adhesive

  • Completely fills the area between rod and hole to create a stress-free, high load anchorage
  • Formula is designed for use in all types of weather
  • Easy to clean up with no sagging and no dripping
  • Dispensing is fast and easy – even the 28 oz. cartridge can be hand dispensed
  • Fast curing times, eg. only 35 minutes at 16 degrees F (minus 9 degrees C)
  • Conveniently not mix-ratio sensitive
  • Works well in damp holes and underwater applications
  • Same formula for both solid and hollow base materials
  • Less adhesive required makes A7 usable in 1/16″ and 1/8″ over-sized holes
  • Two-component methyl methacrylate adhesive
  • Non- sag paste
  • Early gel and cure times
  • Dark grey color
  • Dispenses and cures in cold weather, but also works well in hot weather
  • Pumpable down to 0 degrees F (17 degrees C)
  • Quick insertion time means lower labour cost
BASE MATERIAL (F°/C°) WORKING TIME FULL CURE TIME
100°/ 38° 5 minutes 25 minutes
80°/ 27° 5.5 minutes 30 minutes
60°/ 16° 7 minutes 35 minutes
40°/ 4° 15 minutes 75 minutes
20°/ -7° 35 minutes 6 hours
0°/ -18° 4 hours 24 hours

Additional information

Weight 3.25 lbs

Reviews

There are no reviews yet.

Be the first to review “Red Head A7 Acrylic Adhesive”

Your email address will not be published. Required fields are marked *