Milwaukee 2897-22 M18 Fuel 2 Piece Cordless Combo Kit

Milwaukee 2897-22 M18 Fuel 2-Tool Combo Kit

CALL OR CHAT FOR PRICE

Product Description

Milwaukee 2897-22 M18 Fuel 2 Piece Cordless Combo Kit

2nd Generation FUEL Combo Kit features improvements focused on optimizing every element of power tool systems – Motor, Electronics and Batteries

  • POWERSTATE™ Brushless motors are more efficient than brushed motors to deliver more power and longer runtime
  • REDLINK PLUS™ Intelligence electronic system prevents damage to the tool and battery caused by overloading or overheating
  • REDLITHIUM™ batteries deliver more work per charge and over the life of the battery

1. Milwaukee 2704-20 M18 FUEL 1/2″ Hammer Drill Driver

  • Milwaukee’s 2nd Generation FUEL Hammer Drill/Driver is smaller and more powerful compared to the 1st Generation Model 2604
  • The 2704 is shorter (both from front to back and from top to bottom)  than 1st generation 2604 FUEL Hammer Drill/Drive
  • All- Metal Ratcheting Lock Chuck maximizes grip, bit retention and durability
 Milwaukee 2nd vs 1st Generation FUEL Hammer Drill  Comparison
Model no. 2704-20 (2nd Gen.) 2604-20 (1st Gen.)
Chuck Type 1/2″ Metal single sleeve – Ratcheting Lock 1/2″ Metal single sleeve – Ratcheting Lock
Maximum Torque 1,200 in-lbs 725 in-lbs
No Load Speed – Low Range  0 to 550  0 to 550
No Load Speed – High Range 0 to 2,000 RPM 0 to 1,850 RPM
No Load Blows Per Minute 32,000 BPM 31,150 BPM
Length 7.5″ 8.1″
Weight 3.5 lbs 3.5 lbs

 

2. Milwaukee 2753-20 M18 FUEL 1/4″ Hex Impact Driver

  • Milwaukee’s 2nd Generation FUEL impact driver is smaller and more powerful compared to the 1st Generation Model 2653
  • Shorter than 1st generation 2653 FUEL impact driver with smaller diameter motor housing
  • Improved Impact Mechanism Design for more peak torque, reduced wear and longer life

4-Mode DRIVE CONTROL™ for greater control over output speed and power

  1. Mode 1: Precision applications
  2. Mode 2: Prevents breaking, stripping or overdriving of fasteners
  3. Mode 3: Performance maximization
  4. Mode 4: Specially tuned for driving small self-drilling screws

Self-drilling screw mode (Mode 4) goes through 3 phases from start to completion

  1. Controlled start ramps up to 3,000 RPM to reduce walking
  2. Fast driving at 3,000 RPM maximizes speed through material
  3. Controlled finish slowing down to 750 RPM to reduce stripping and breaking
 Milwaukee 2nd vs 1st Generation FUEL Impact Driver Comparison
Model no. 2753-20 (2nd Gen.) 2653-20 (1st Gen.)
Drive 1/4″ Hex 1/4″ Hex
Maximum Torque 1,800 in-lbs 1,600 in-lbs
No Load Speed 0 to 3,000 RPM 0 to 2,900 RPM
No Load Impacts Per Minute 0 to 3,700 IPM 0 to 3,600 IPM
Mode 1 0 to 850 RPM / 200 in-lbs 0 to 850 RPM / 200 in-lbs
Mode 2 0 to 2,100 RPM / 700 in-lbs 0 to 2,100 RPM / 700 in-lbs
Mode 3 0 to 3,000 RPM / 1,800 in-lbs 0 to 2,900 RPM / 1,600 in-lbs
Mode 4 Self-drilling Screws n/a
Length 5.25″ 5.5″
Weight 2.1 lbs 2.2 lbs

 

Kit includes

  • 1 – Milwaukee 2704-20 M18 GEN II FUEL 1/2″ Hammer Drill/Driver
  • 1 – Milwaukee 2753-20 M18 GEN II FUEL 1/4″ Hex Impact Driver
  • 2 – M18 REDLITHIUM XC 5.0 Extended Capacity battery packs (48-11-1850)
  • 1 – M18 & M12  charger
  • 1 – Carrying case

Additional Information

Weight 17 lbs
Brand Name

Milwaukee Tools

18V Power Tools

Drills, Impact Drivers

Reviews

There are no reviews yet.

Be the first to review “Milwaukee 2897-22 M18 Fuel 2 Piece Cordless Combo Kit”

Your email address will not be published. Required fields are marked *